Q. How do I adjust the Brother P-Touch QL500BW Label Tape margin?
A. To adjust the tape margin, follow the given steps:
- Hold the ‘Code’ key.
- While holding the ‘Code’ key, press the ‘Tape’ (E) key. The current margin settings will be on the display.
- Each time the ‘Tape’ (E) key is pressed, the margin settings are changed, from one setting to another. You can select ‘NONE’ for 1/6' inch margin, ‘NARROW’ for 5/16' inch margin, ‘HALF’ for 1/2' inch margin and ‘FULL’ for 1' inch margin.
- Release the ‘Code’ key when the desired margin setting is set or adjusted.
This way you can adjust the Brother P-Touch QL500BW Label Tape margin.
Q. Does the Brother P-Touch QL500BW label printer supports USB 3.0 connectivity?
A. Although the printer is less costly and is user friendly, but it does not support USB 3.0 connectivity.
Q. How do I print vertically?
A. To print vertically, click on ‘Format’ and select ‘Text’. On the ‘Text Tab’, select the Text Orientation that shows the text vertically on the label and click Ok. Click 'A' Text Tool and click on the label. Enter the text and it will appear on the label in the selected orientation.
Q. Do the Brother P-Touch QL500BW Label Tapes have great adhesive properties?
A. Yes these label tapes have great adhesive properties. They stuck very well and would not come off. They have adhesive just like the adhesive used by the MVA for car tag stickers.
Q. How do I create a label containing a bar code?
A. To create a label containing a bar code, follow the given steps:
- Click ‘Insert’. Select ‘Barcode’ from the dropdown.
- The ‘Bar Code Properties’ dialogue box appears.
- Select a protocol and choose settings from the ‘Protocol’ tab and the ‘Setup’ tab.
- Click the ‘Input’ tab. Type the barcode data in the ‘Data’ edit box, and click ‘OK’.
- The bar code will be inserted on the label.
- Adjust the margin, alignment and other properties that you want to. The label is ready for printing.
Q. The Brother P-Touch QL500BW Label Tape width cannot be selected. Only standard paper sizes can be selected. What should I do to resolve this?
A. If your Brother P-Touch QL500BW Label Tape cannot be selected, make sure that the printer driver for the printer is installed. To resolve this, be sure to download and install both P-touch Editor and the printer driver, as they are separate files when downloaded from the website.
Secondly, the printer may not be the default printer for P-touch Editor. For this, In P-touch Editor, click on ‘File’ and select ‘Printer / Page Setup’ to display the Printer Setup dialog box. Check that your printer is selected. If not, select it and click the ‘Save Current Selection’ button. Also, if your printer is listed under ‘Other Printer’, the printer driver has not been installed correctly. In this case, you need to install the driver again.
Q. When I try to run the P-touch Library, a warning message ‘A compatible printer cannot be found’ appears. What should I do?
A. This issue may occur when any printer driver that supports ‘P-touch Transfer Manager’ has not been installed. Install the latest version of P-Touch Editor to stop facing this issue. You can take more help from Brother.
Q. The message "The tape cassette installed in the machine does not match the type selected in the application." is displayed. What should I do?
A. This error message appears when the Brother P-Touch QL500BW Label Tape size of the installed in the machine is different from the one selected in P-touch Editor. Two probable solutions to this are:
- Install the correct tape cassette into the machine after checking the tape width selected in P-touch Editor. Click on ‘Right Arrow’ button.
- Click on the button next to ‘Right Arrow’ button, to cancel the print job. Try printing again by selecting the tape width in P-touch Editor so that it matches the one installed in the machine.