Epson Stylus SX105 is an all in one low priced multifunction printer. It produces good quality text prints and photos. Epson Stylus SX105 ink cartridges use DURABrite Ultra ink, that makes the maintenance and running cost more affordable. Plus, you don’t need to worry about fading and smudging. The device is compact in design and can easily fit into the work environment.
The device weighs approx 4 kg and measures 434 x 327 x 185 mm respectively. At the front bottom of the printer, there is an input tray which can hold up to 100 sheets. It has a small control panel with different function buttons for printing and copying. The scanning resolution of the printer is up to 600 x 1200 dpi and the print resolution is up to 5769 x 1440 dpi.
Epson Stylus SX105 is compatible with Windows 2000, Windows Vista and Windows XP operating systems. The printing speed of this printer is 26 ppm. The device offers reasonable printing costs with its four-ink system for Epson Stylus SX105 ink cartridges. It allows you to replace the colours that are used most, instead of replacing all the cartridges. Prints are resistant to water and dry quickly.
Advantages:- Low printing cost
- Uses DURABrite Ultra ink
- Affordable
- Compact design
- Water resistant prints
- Lacks professional photo printing
- Slow printing speed
- Lacks ADF support
- No duplexer
- Lacks mobile printing
Epson Stylus SX105 is an economical printer with print, scan, and copy functions. The printer is simple in design and easy to use. It uses DURABrite Ultra ink, producing good quality outputs at a reasonable cost. The printer is low priced as compared to other competitors available in the market. However, it lacks various advanced feature such as mobile printing apps, ADF support and duplex printing which might not make it a good choice for large working groups.
Cartridge Requirements:The Replacement for Epson Stylus SX105 ink cartridges are:
- Epson T0711 black
- Epson T0712 cyan
- Epson T0713 magenta
- Epson T0714 yellow
How to prepare your Epson Stylus SX105 printer for troubleshooting any issue at home?
Many of the printing issues of an Epson Stylus SX105 are not that terrible as they seem. Such issues can be resolved by following some simple troubleshooting steps without the need of any printer expert. All you need to have are the right set of instructions and high-quality Epson Stylus SX105 ink cartridges. However, before you proceed to fix any print or scan quality issue of your printer, first get your device ready for the troubleshooting.
Be sure to verify that the following conditions are all met:
- The power supply voltage must be within the specification limits. (Measure the voltage at the wall socket.)
- The power code must be free from damage, short circuit or breakage, or miswiring in the power code
- The printer must be grounded properly
- If it has been a long time (more than 6 months) since you replaced your Epson Stylus SX105 ink cartridges then you might need to get new ones before you open your device
- The printer should not be located in a place where it can be exposed to too high or low temperature, too high or low humidity, or abrupt temperature change
- The printer should not be located near waterworks, near humidifiers, near heaters or near flames, in a dusty atmosphere or in a place where the printer can be exposed to blast from an air conditioner
- The printer should not be located in a place where volatile or inflammable gasses are produced
- The printer should not be located in a place where it can be exposed to direct rays of the sun
- The printer must be placed on a strong and steady level table (without an inclination larger than five degrees)
- Any vibrating equipment must not be placed on or under the printer
- The paper used must conform to the specification
- There is no error in handling of the printer
- Check the inside of the printer, and remove foreign matters if any, such as paper clips, staples, bits of paper, paper dust or toner
- Clean the inside of the printer, Epson Stylus SX105 ink cartridges, and the rubber rolls