0283 308 33221
The HP 400 LaserJet Pro M475dn is a multipurpose colour printer that comes with an ADF and automatic duplexer which can save you a lot of paper. One can expect great graphics and printed documents from this printer. Designed for businesses that need quality output, the HP LaserJet Pro 400 Color MFP M475dn toner cartridges are very reasonably priced and compatible with the printer model to drive down running costs even further.
The printer weighs 65 pounds and measures 19.7 by 16.5 by 19.0 inches in terms of height, width and depth. The printer is too big to share a desk with, and moving it from one place to another is a 2-person job. The printer has a 300-sheet standard paper capacity, that is further split between a 250-sheet input tray and 50-sheet multipurpose tray. The paper trays are provided on the bottom and the Ethernet and USB connectivity ports are provided on the back. With the multifunctional printing capabilities, the M475dn is also able of copying, scanning, and faxing and is efficient in performing printing task effectively.
Advantages
- Good output quality
- Headed by good graphics
- ePrint capabilities
- Has an easy-to-use touch screen control panel
- Printer comes with an ADF
- Consumables are very reasonably priced
- High-quality HP LaserJet Pro 400 Color MFP M475dn toner cartridges
Disadvantages
- Slow print speed
- Slightly sub-par text quality
- Low paper handling capacities
Cartridge Requirements
The compatible HP LaserJet Pro 400 Color MFP M475dn toner cartridges
- HP 305 CE410X Black Toner
- HP 305 CE411A Cyan Toner
- HP 305 CE412A Yellow Toner
- HP 305 CE413A Magenta Toner
Conclusion
Ideal to use for small office purpose the HP LaserJet Pro 400 Color MFP M475dn printer is designed for businesses that require great quality coloured output. Aside from delivering quality prints, the multipurpose printer is capable of printing, copying, scanning and faxing. It is overall a small-office color laser MFP printer with very good graphics quality and slow print speed.
How to resolve the issue of faded prints while printing with HP LaserJet Pro 400 Color MFP M475dn Printer?
If your printouts are coming out as light or faded prints while printing or you see prints with low resolution, make sure you are using a high-quality HP LaserJet Pro 400 Color MFP M475dn Toner Cartridges or toner cartridges are not defective. The problem can also occur due to using inappropriate paper media. Check the below points to overcome the faded print issue.
- Make sure the paper you are using, meets all the paper media specifications recommended by HP.
- Print the supplies status page to check the remaining HP LaserJet Pro 400 Color MFP M475dn toner cartridges.
- If the toner cartridges found low or extended, replace them with new compatible HP LaserJet Pro 400 Color MFP M475dn Toner Cartridges immediately.
- Make sure that the print density settings are set as '0', as problems may also occur due to any change in print density settings.
- Run a calibration, if the product needs to be calibrated.
How to fix the problem if the product does not pick up the paper in HP LaserJet Pro 400 Color MFP M475dn Printer?
- If you have certain paper handling issues like the product does not pick up the paper from the tray, try the suggestions given below:
- Make sure there is no paper jammed inside the product, if yes remove them.
- Always use the correct size of the paper and load them carefully.
- Make sure the paper guides in the tray are adjusted correctly for the size of paper you are using and align them with the paper size marking at the bottom of the tray.
- Check the control panel and feed the paper manually if you see the product is waiting for you to acknowledge the prompt.
If still, you are not able to resolve the issues, contact your nearest HP Printer Solutions Centre for additional support.