Samsung SCX-4600 Toner Cartridges

The Samsung SCX-4600 printer is a monochromatic multipurpose printer. It is good for small offices and even home users like writers etc. A Samsung SCX-4600 toner cartridge is provided with the printer on purchase of the product. The printer has a stylish feel to it with a frosted black body with glossy black strips along the edges. It has a decent footprint of 416.56 mm width, 408.94 mm depth and 1 height of 276.86 mm. This printer blends in cohesively with any office setup attributable of its design and looks. It weighs about 10.6 kgs.

The Samsung SCX-4600 printer offers a print resolution of 1200 dpi and an interpolated scanning resolution of 4800 dpi. The company claims that this laser printer is capable of printing 22 pages per minute. The first print comes out at 9 secs. The printer comes with a pre-installed Samsung SCX-4600 toner cartridge. You are only required to remove the protective seal from the cartridge. This cartridge gives up to 2500 prints. The output tray has a capacity of 250 sheets. It can print A4 plain paper, transparencies and other media. This printer is designed to be compatible with Windows, iOS and Linux. The printer can be connected to the system via a USB cable. The installation process is quite easy and the required drivers and utilities are provided with the printer.

• Great print quality
• Easy maintenance
• Easy to understand display panel
• Fast printing
• One touch screen print
• ID card scanning button

• No wireless connection

The replacement for Samsung SCX-4600 toner cartridge is:

• Compatible High Capacity Black Samsung 1052L Toner Cartridge (MLT-D1052L/ELS)

The Samsung SCX-4600 printer is the right printer for a busy small office. Though it lacks wireless connectivity of any sort, features such as single touch screenshot printing and ID card copying and printing make it a great choice for the users. The installation is simple and eventually, the running and maintenance costs are low.

How to resolve the ‘Alignment Unsuccessful’ error message appearing in the Samsung SCX-4600 printer?

To resolve and fix the ‘Alignment Failed’ or ‘Alignment Unsuccessful’ error message, follow the below steps:

Step 1: To complete the alignment.

• Verify and check that the printer is loaded only with clean and fresh white pages. Then retry the alignment.
• If your Samsung printer has a scanner, you can see some instructions on the alignment page to locate and place the page on the scanner bed. Follow the steps and perform a Scanning function accordingly.
• If the 'Alignment Unsuccessful' message is still appearing or not resolved, and you see a skip button. Select skip and try the next step. Print quality might be affected if you choose to continue printing without alignment.

Step 2: Reset the printer.

• Power off the printer.
• Disconnect the power cord from the rear of the printer and wait for approx 30 seconds.
• Reconnect the power cord to the rear of the printer and turn on the machine.
• Before proceeding, wait until the printer is idle and silent.

Step 3: Use high-quality compatible Samsung SCX-4600 toner cartridges.

Step 4: Test and verify the alignment page to ensure that the printer is properly aligned.

Step 5: Check estimated toner levels of your toner cartridges. If any of the Samsung SCX-4600 toner cartridges are low or empty, replace them. Make sure you use high-quality compatible toner cartridges.

Step 6: Cleaning the printhead or toner cartridge area might resolve the issue.

Step 7: If you have performed all the steps but the alignment issue remains, replace the printhead for Samsung SCX-4600 toner cartridges.

After performing all the above-mentioned steps, servicing or replacing, contacting the support team is the only option to resolve the issue.