Epson XP 102 is an affordable multifunctional printer for home users. It has a small and compact design with an easy-to-use interface. The printer offers a quality out for all its basic functions including, printing, copying and scanning function. However, the printer does not have any advanced feature that most of its competitors offer. For example, the Epson XP 102 does not have any wired or wireless networking feature. It also doesn’t have any fax functionality or ADF feature.
It’s a small device that weighs approximately 3.9kg and measures 390 X 300 X145mm. It has a flatbed scanner that offers printouts with the maximum resolution of 600 X 1,200 dpi. The printer has two paper trays; input tray at the rear (with 50-sheet capacity) and output tray at the front of the printer.
The printer uses Epson XP 102 ink cartridges and offers vibrant colour prints at a decent speed. The printer has individual ink cartridge slots that help you save more on its running cost. The Epson Expression XP 102 is best known for its monochrome printing.
Advantages:- Four-ink system
- Vibrant colour printing
- Low cost device with low running cost
- High speed USB connectivity
- Small footprint
- No fax feature
- No wireless connectivity
- No memory card reader
- No network connectivity (either wired or wireless)
The Epson Expression XP 102 is a small yet sufficient all-in-one printer for home users. The printer offers great photo prints at good speed. It can be the best choice for day-to-day home printing tasks and/or for school assignments.
However, the printer does not offer wireless connectivity, ADF, fax, automatic duplex printing etc. that make it little less suitable for small office users.
Cartridges Requirements:The replacement cartridges for Epson Expression XP 102 ink are:
- Epson T1811 Black
- Epson T1812 Cyan
- Epson T1813 Magenta
- Epson T1814 Yellow
These cartridges are also available in 18XL T1816 multipack (Expression XP 102 multipack) that lasts longer and offers you great saving on ink expenses.
How to get rid of Epson XP102 printer’s print quality issues?The all-in-one Epson XP 102 printer serves your printing, scanning and copying requirements well but there are still a few issues that might bother you. One of the major problems faced with the device is the printing problem. The printing problems of this printer does not only include the high expenses of the genuine Epson XP102 ink cartridges, but also include the quality issues like bands and stripped printouts.
At times printing troubles like missing colour or black print or broken prints etc arise. This may be caused due to clogged print head nozzles or the consumption of the ink. The troubleshooting for such issues aren’t difficult and you can easily solve the problem yourself just by following these few steps:
Note: If at any step the printing errors that you are facing are corrected then you may stop. Your printer will work fine. If the problem continues then follow the other steps.
Step One: Check the Print SettingsFirst of all you need to check that the printer software for your printer is not set to use black ink only. If it is then change the settings to colour. If the problem persists then there is a possibility that the print head nozzles require cleaning.
Step Two: Cleaning of the Print Head NozzlesAnother reason of the bad print quality or blurred printouts can be the dried out print heads. Due to long gaps of inactivity, the Epson XP102 ink cartridges can dry up and clog the nozzles. With the help of a syringe, inject a cleaning solution into an old empty ink cartridge. Initiate the cleaning cycle a few times and print some pages of large images. Once you get satisfactory results, remove the cartridge with cleaning solution and keep it away for later use. You can also keep the printer turned on through the night. This will allow the dried ink to soften a bit and clearing off the nozzles.
Step Three: Replacing the ink CartridgeIf you are still facing the printing troubles then there is a probability that the inks have been used up. You need to replace the ink cartridges. Open the printer cover and press the ink button to do so. Open the cartridge cover and carefully lift the cartridge out and dispose off.
Take a new Epson XP102 ink cartridge and shake it four to five times for good results before opening the pack. Remove the new cartridge from the pack and place vertically into the holder of the printer. Push the cartridge down until you hear a click. This means that the new ink cartridge has been fixed properly into the holder. Close the cartridge as well as the printer cover. Press the ink button to charge the nozzles for the ink delivery system. It will take about a minute to complete.