Installation of Canon CL541 ink cartridge
The compatible Canon CL541 are very easy to install and work with. It is likely that on installing them for the first time on your Canon Pixma printer you get an error message, such as “non-original cartridge detected”. You can simply take out the cartridge and reinstall it and check if the message continues. If yes then the another solution is to press the stop button for 5 seconds. The stop button has a triangle inside a circle. On pressing that you turn the printer’s cartridge recognition facility off, which lead you to easily use these unrecognized cartridges.
Refilling of Canon CL541XL and CL 541 Ink Cartridges
As a user, it is profitable for you to use the ink cartridges until you do not see the ink cartridge's filling level warning on your computer. It is recommended to replace or refill the cartridges as soon as you get this message.
What if you use an empty cartridge? Using a complete ink cartridge will damage your printhead and push you in trouble. Read the instructions to know the refilling process of Canon CL541 and start your printing afterward.
For refilling ink cartridge, keep handy following supplies:
- Small drill
- Syringes with needles
- Putty knife
- Coloured ink cartridge (3ml for CL541 and 5 ml for CL541XL version)
Step-by-step process to refill the Canon CL541 ink cartridge
- Pull out the empty cartridge from the printer and place it on your table.
- Now take the cartridge and remove the top label from it.
(Use putty knife to remove the label) - Use a drill to widen the ventilation holes. (you will find these holes beneath the label)
- The top chamber is given for Magenta, left for Cyan and right for Yellow colour. Refill ink as per their allocated chambers.
- Draw in the ink as per requirement and insert the syringe with the needle carefully into the sponge inside the cartridge.
- Carefully fill the ink and wipe the excess ink.
- Now apply the label or tape.
- Install the cartridge back into the printer and start printing.
How to get rid of Canon Check Ink 1686 and 1688 error messages?
Error 1686 and 1688 error are common low ink warning messages used by an entire series of Canon inkjet printers that work with the Canon CL541 ink cartridges. This is an indication that states “The ink may have run out” or “The ink has run out”. Whichever message you receive the printer would stop printing as the result.
These errors send a message to the printer that there is no more ink there to fulfill the printing tasks. The printer would not start working again until the message disappears. If you are struggling with this issue there are a few method that can aid you in resolving the issue.
What are the possible reasons behind these messages?
First, the obvious one, that your Canon CL541 ink cartridges are low on ink or are empty. However, if you have recently refilled the cartridges or replaced them with remanufactured Canon CL541xl, this message can be a puzzle for you.
If the later one is the issue with you, there is nothing to worry about. The printer reads these remanufactured or refilled cartridges as empty and displays this message. Most of the time because the ink monitoring chips on the genuine Canon inks are intended to be used one-time only. So, when the genuine cartridges are refilled or replaced by compatible ones, the printer can’t check the inside ink levels and continue showing the error.
How to get rid of these messages?
If you have just refilled or replaced the Canon ink cartridges just press the printer’s RESUME/STOP/RESET button for at least 5 seconds. The message will disappear after this step. You will find this button on the printer with a red coloured triangle in a circle.