The high-quality compatible HP 12A toner cartridges are the cost-effective alternative from buying the high priced original cartridge. These cartridges are manufactured under strict ISO standards using only the highest quality inputs in order to achieve the highest quality remanufactured HP Q2612A laser toner.
This HP toner comes in black colour and can print up to 3,000 pages at 5% coverage and is designed to work with the following printers HP LaserJet 1018, HP LaserJet 1010, HP LaserJet 1022, HP LaserJet 3015, HP LaserJet 3050, etc.. Our compatible toner cartridges comes with one year guarantee and full customer support.
These compatible cartridges are not manufactured by the original manufacturers, instead, they are recycled and sold by third parties at low cost. These cartridges are cleaned, filled with high-quality ink, sealed, repackaged and sold in bulk. The remanufactured black HP 12A toner cartridges are specially engineered to meet the highest standards of quality, reliability and exceptional yields that meet the standards of the original toner cartridge and offer high-quality printing results. While most competitors simply refill the toner cartridge and hope that the drum and other key components last, but we fully disassemble the toner cartridge and rebuild it to ensure the highest quality prints. The use of remanufactured toner cartridges does not void your printer's warranty.
Get long-lasting and trouble-free printing with the Printerinkcartridges.ie. You can save up to 74% if you purchase the HP Q2612A laser toner from us. These high-quality HP 12A cartridges are an economical and sensible alternative to expensive original toner cartridges. Our compatible toner cartridges guarantee you with the quality prints which are as good as the original ones purchased from a retail store. We have thousands of satisfied customers, and want you to be one of them!
SECTION 1: Technical Details
Print technology | Laser |
Resolution technology | Ultraprecise |
What's in the box | 1 X HP 12A toner cartridge, Recycling guide |
Cartridge colour | Black |
Package count | 1 |
Technology | Laser |
Subgroup | Standard capacity cartridges |
Supply type | Cartridges |
Yield | 2000 pages |
Page yield (black and white) | 2000 pages |
Colour(s) of printing supplies | Black |
Selectability | 12A |
Operating humidity | 20 to 80% |
HP Q2612A laser toner weight | 0.7 kg |
Package weight | 0.9 kg |
Minimum dimensions (W x D x H) | 357 x 105 x 134 mm |
Package dimensions (W x D x H) | 357 x 105 x 134 mm |
Compatible with | HP LaserJet 3000 - 4999, HP LaserJet M, HP Laserjet MFP, HP LaserJet 1000 - 2999, HP Laserjet 3055, HP Laserjet 1010, HP Laserjet 1012, HP Laserjet 1015, HP Laserjet 1018, HP Laserjet 1020, HP Laserjet 1020 Plus, HP Laserjet 1022, HP Laserjet 1022n, HP Laserjet 1022nw, HP Laserjet 3015, HP Laserjet 3020, HP Laserjet 3030, HP Laserjet 3050, HP Laserjet 3052, HP Laserjet M1319, HP Laserjet M1319f, HP Laserjet M1005 Mfp, HP Laserjet M1319 Mfp, HP Laserjet 3015 Aio, HP Laserjet 3020 Aio, HP Laserjet 3030 Aio, HP Laserjet 3050Z |
SECTION 13: Refilling HP 12A Toner Cartridge
The HP Q2612A toner is one of the famous HP toner having a long market presence. No chip, easy to install and refill, stores more toner and compatible with a number of HP printers.
To refill this toner you need the following tools:
- Screwdriver
- Wire cutter
- Funnel cap
- Toner bottle
- Awl
HP Q2612A laser toner step-by-step refilling process- Move the protective shutter aside and take a spring out.
- Unscrew 2 screws which are holding the lid of the drum.
- Take off the lid carefully.
- Use the awl, hook the charging roller by the metallic axis and take it out.
- Now, you will see 2 holes inside of the cartridge through which the pin should be pushed out.
- Use an awl, insert it into the hole and push the pin out.
- Repeat the same on the other side of the cartridge. Be careful while handling the toner. You need not turn cartridge a lot because it has some toner waste.
- Use the wire cutter and take the pin out from the outer side of the cartridge.
- Do the same thing on the other side. The cartridge is now separated two halves.
- Now take the drum shutter out, unscrew it, shake the wasted toner out and vacuum clean it.
- Take the other half toner with a magnetic roller. Unscrew the lid on the side without a gear on the magnetic roller. Carefully dangling the lid, take it off.
- Hold the magnetic roller of HP 12A toner cartridge and pull out the cap that covers the toner reservoir.
- Carefully take out the toner leftovers.
- Now fill the toner by holding the magnetic roller up.
- Install the lid back and screw it carefully.
- Take the waste toner tank half. Wipe the charging roller and install it back.
- Next, install the OPC drum. Don’t place the side lid back yet, because it will be inconvenient to install pins back after that.
- Now put the halves together and insert the pin from the one side and then from the other side.
- Push them in tightly using a screwdriver. The shutter should close up just fine.
- Put the lid back and screw it.
- Place the spring back in the correct position. If it is placed wrongly, it will brush against the drum. Your cartridge is refilled now.
How to replace your HP Q2612A toner cartridge?
Step 1
Prepare the HP Q2612A toner. Remove the cartridge from packaging material. Then gently rock the cartridge side to side for an even distribution of the ink inside the toner.
Step 2
Remove the sealing tape of the toner from its side. You need to click-open this tape and pull it out. (keep this tape back in the packaging box for recycling purposes.)
Step 3
Keep the printer on and open the cartridge door. (Press the power button if it is not lit.)
Wait until the previously installed cartridge is silent and idle. Remove this old cartridge and put it aside for recycling purposes.
Step 4
Install the new HP 12A toner cartridge in the cartridge slot. Make sure it makes a ‘Click’ sound when you push it in. It makes sure that the cartridge has been installed properly. Close the cartridge door and do a test print.
Why my printer continues to show ‘Low Ink’ or ‘Install New Cartridge’ message?
It is a normal issue when you install a compatible HP toner cartridge. To resolve this issue you can simply click ‘Ok’ or ‘Continue’ on your PC and continue with your printing work.
The other reason behind this error can be, that you have installed the new HP 12A toner cartridge without turning the printer on. If you replace the cartridge while the system was off, it does not get the message of the replacement. To prompt the printer to read this new cartridge, you need to reset the device.
Turn off the printer and disconnect its power cord from its back and the wall socket. Wait for 20 minutes and reconnect the power cable to the printer and the power socket. Turn on the printer. This will make the printer to read the recently installed cartridge and resolve the error.