The HP LaserJet Pro M501n printer is a monochrome printer with only printing capability. The printer incorporates laser technology and provides quality outputs. This printer measures 41.8 x 37.6 x 28.9 cm with 11.4 kg. It gives class-leading energy efficiency and has a 1500MHz processor and 256 MB of system memory.
This LaserJet Pro M501n printer has a fast wake-up time of about 7.3 seconds and it also provides fast printing speed of 43ppm. Besides this, the printer has a high paper handling capacity with 1200 and 250 sheets for input and output tray respectively. For trouble-free printing, the printer uses mobile printing options by leveraging HP ePrint, Apple AirPrint and Mopria-certified. The M501n printer is flexible with multiple operating systems and media types. Along with this, one can get a strong protection for data, devices, and documents, by using embedded security features. Using HP LaserJet Pro M501n toner cartridges with JetIntelligence, good quality crisp outputs are expected. This fast speed LaserJet HP printer is ideal for providing monochrome prints for your office projects.
Advantages
- Low-cost printer
- Secure printing solution
- Fast printing speed
- Exceptionally low energy consumption
- Optimum input capacity
- Compact size printer suitable for office desk
- Mobile printing capabilities
- High paper handling capacity
- Falls under noiseless printer categories
Disadvantages
- Monochrome printer
- Manual duplexing
- Does not have wireless capabilities
Cartridge Requirements
HP LaserJet Pro M501n toner cartridge includes:
- CF287A Black toner cartridges
Conclusion
With the HP LaserJet Pro M501n printer, add impressive print speeds and performance to work in your office. HP LaserJet Pro M501n toner cartridges with JetIntelligence provides crisp monochrome output. This is an energy-saving printer which has a fast wake up time. Moreover, it delivers security features to help guard against threats.
How to reset the toner level after refilling HP LaserJet Pro M501n toner cartridges in HP printer?
To reset toner cartridge for your machine, follow these steps:
- Place the refilled cartridge into your printer.
- To recognise the cartridge, print an alignment page. The printer will now read the ink level where it was before refilling.
- Remove the already installed cartridge from the printer and install a new one. Let the HP printer print an alignment page again so that it recognises the cartridge as a different cartridge from the first one.
- Now, replace the second cartridge from the third one. After replacement, run the same alignment page.
- The printer only preserves the memory of two print cartridges. Consequently, it will erase the memory of the first (refilled) HP LaserJet Pro M501n toner cartridge.
- Install the refilled toner cartridge into your printer. The HP printer will now recognise the cartridge as full.
- Strip over the contact squares on the top left corner of the cartridge contacts. Insert the cartridge into the printer and print an alignment page. Ignore any message that might appear stating there is a problem with the cartridge.
- Take the cartridge out of the printer. From the left corner remove the tape and put the tape over the contact squares on the top right corner.
- Place the cartridge back into its position and run another alignment page.
- Remove and reinsert the toner cartridge (make sure that there is no tape on any of the contacts). Check if the printer recognizes the cartridge as being full.
- If the cartridge is still shown being empty, repeat the above steps. For this time, use the bottom corner contact squares instead of the top ones.
- If you are still unable to reset the cartridges, the only way to do it is using multiple HP LaserJet Pro M501n toner cartridge.