With the large paper handling capability and fast printing speed, the OKI C531 is an essential printer that goes well with small businesses and workgroups. It uses high-definition OKI C531 toner cartridges that enhance the look of your documents while keeping the running costs low. The printer has a small control panel on the right side of the device's surface and offers flexible media support, with the ability to handle A6 size papers and even 1320mm banners. It also supports printing business cards and similar types of outputs. The laser printer aims at delivering high professional-grade prints, but one might find it inferior when compared to other laser printers that support scanning and copying features. The printer supports two-sided printing and has a capacity to produce as many as 26 pages per minute in colour and up to 30 pages per minute in black and white. With the high network interface, the OKI printer is capable of printing at ease sitting at any corner.
Advantages- Supports duplex printing
- Has larger internal memory and can expand it to 768mb
- High network interface connectivity
- Prints high-quality documents at a cheaper rate
- Support professional grade prints
- Low paper input capacity
- A single-function device capable of colour duplex printing
Cartridge Requirements
The OKI C531 toner cartridges include:
- OKI 44973508 Black Toner
- OKI 44469724 Cyan Toner
- OKI 44469723 Magenta Toner
- OKI 44469722 Yellow Toner
The Oki printer has the capacity to save paper and uses high-capacity OKI C531 toner cartridges for a cheaper cost-per-page output. If you are looking for a printer that is ideal for handling small office workgroup, this is the best option to go with. Also, its range of compatible cartridges will help in saving more money than the original toner cartridges. Start saving by purchasing your OKI C531 printer ink from us today.
What can be done if OKI C531 printer prints Fuzzy prints or letters and graphics are not as sharp as expected? How can fuser problems be resolved?
Frequent printing can make the fuser unit prone to wear and tear. Proper maintenance is required, such as periodic cleaning and replacements of old or dried out OKI C531 toner cartridges, is important to prevent any type of print defects. Check the following to replace the fuser unit.
- The fuser unit is present inside the printer just behind the OKI C531 toner cartridges. Press the top cover and release the printer’s cover fully.
- Identify the handle present on the top of the fuser unit.
- Pull the two fuser retaining levers towards the front of the printer so that they are fully upright.
- Hold the fuser by its handle, lift it straight up and out of the printer. If the fuser is still warm, securely place it on a flat surface, so that it won’t be damaged by heat.
- Remove the new fuser unit from its packaging and remove the transit material.
- Hold the new fuser by its handle and make sure that it is placed correctly. The retaining levers should be kept fully upright, and the two locating lugs should be kept towards you.
- Lower the fuser in the printer and locate the two lugs into their slots in the sides of the printer cavity.
- Push down the two retaining levers towards the rear end of the OKI C531 printer to lock the fuser properly at its place.
- Finally, close the top cover and press down firmly at both sides so that the cover latches are fully closed.
What can be done if toner comes out when rubbed?
If the toner specks or comes out of the OKI C531 toner cartridges, try the following:
- If the thickness and type of paper used in the printer are incorrectly set. It is recommended to set the correct value of media type and media weight in the Media menu or set one value lighter for media weight.
- In case a recycled paper is used for printing.
Set one value thicker for media weight in the Media menu to resolve the problem.
Try the following listed above can help in resolving the issue.